|
Tube Removal Tools
|
|
Tube Wall Reducer |
| Features |
- Used to thin the walls of heavy gauge
tubes as a step in their removal from
tube sheet.
- Suffix model number with tube gauge when
ordering. Example for 3/4O.D.
16G, model number will be WR-750-16.
- Wall reducers available for mm tube sizes also.
Please enquire.
- Wall reducers are suited for tube sheets up to 5
thick. Longer reaches are available.
|
| Sizes Available |
3/8" O.D. TO 4" O.D. |
| Models Available |
WR-375 TO WR-1500
SH-1750 TO SH-4000 |
|
Tube Drift / Knockout Tool |
| Features |
- Used with pneumatic chipping hammer to knock out
tubes / tube
stubs from tube sheet.
- Available in 01 and 06 shanks as standard. 15
(Jumbo) shank available
on request.
- Suffix model number with tube gauge and shank
when ordering. Example
for 3/4 O.D. 16G, 06 shank, model number will
be KT-750-16-06.
- Tube Drifts are available for mm tube sizes
also. Please enquire.
- Standard reach is 6. Longer reaches are
available.
|
| Sizes Available |
3/8" O.D. TO 4" O.D. |
| Models Available |
KT-375 TO KT-4000 |
|
Collapsing Tool |
| Features |
- Used to collapse tube and drive out collapsed
tube from tube sheet with a
chipping hammer.
- Recommended for use on 16G and thinner tubes.
- Available on 01 and 06 shanks as standard.
- Suffix model number with shank number when
ordering. Example for
3/4 O.D. 16G, 06 shank, model number will be
CT-750-06.
- Collapsing tools are available for mm tube sizes
and larger tube sizes. Please enquire.
|
| Sizes Available |
3/8" O.D. TO 2 1/2"
O.D. |
| Models Available |
CT-375 TO CT-2500 |
